Technical information

Introduction

AVT GigE Camera and Driver Attributes V1.3.1

This document is a master document for all AVT GigE camera models and is NOT camera specific

Introduction

The document describes the standard and advanced camera controls for AVT

GigE cameras as seen from the AVT GigE SampleViewer. The document is

intended for use with PvAPI SDK. AVT offers a number of GigE Vision camera

families, which includes:

This document can be applied to all of these families.

Important notes

–Bigeye G

–Mako G

–Manta

–Prosilica GB

–Prosilica GC

–Prosilica GE

–Prosilica GS

–Prosilica GT

–Prosilica GX

www



Follow this link to learn about GigE Vision cameras from AVT.

http://www.alliedvision.com/en/products/cameras

Note



This is the master document for all camera models. Not all

attributes are available on all cameras or firmware versions.

For 3rd party users, see the camera XML file. For PvAPI users,

see the PvAttrIsAvailable function call.

For PvAPI users, attribute type is given: Enum, Float32, Uint32,

String, or Command. See the corresponding PvAttrEnum___,

PvAttrFloat32___, PvAttrUint32___, PvAttrString___, PvCom-

mandRun calls.

Note



Uint32 and Float32 ranges: where camera dependent, see cam-

era user manual, or see slider control in AVT GigE SampleV-

iewer. PvAPI users see PvAttrRangeUint32, PvAttrRangeFloat32

calls.

Note



• R/W = attribute is read/write

• R/C = attribute is read only and constant

• R = attribute is read only and may change at any time