Specifications
Camera interfaces
Goldeye Technical Manual V2.4.0
37
Camera interfaces
This chapter gives you information on the control junction, inputs and outputs
and trigger features.
Control connector
Camera I/O connector pin assignment (15-pin
D-sub connector)
This connector is intended for the power supply as well as for controlling the
camera by the user.
Furthermore, some output signals are available, showing the camera state.
Note
Timing specifications in this chapter are valid:
• starting SN 00102 (P-032)
• SN 00308 (P-008)
• For older versions: contact AVT Technical Support.
www
For accessories such as cables see:
http://www.alliedvisiontec.com/emea/products/
accessories/gige-accessories.html
Pin Signal Direction Level Description
1
External Power
+12 V DC (-0%
/ +5%)
Power supply
max. 2.8 A (Goldeye P-
008...)
max. 1.3 A (Goldeye P-
032...)
depending on model
2
3
External GND
4
5--- Reserved
(do not connect)
6--- Reserved
(do not connect)
7RxD In RS232
8TxD Out RS232
Table 18: Camera I/O connector pin assignment (Goldeye xy-...)