Specifications
Example
Activate the two-point correction
>E=1[CR]
4 One-point correction:
Simple subtraction of the correction data A from the input data.
In addition, the set value J is added as offset to each pixel
value.
5 One-point correction:
Simple subtraction of the correction data B from the input
data.
In addition, the set value K is added as offset to each pixel
value.
Note
(*) Test modes 2 and 3 are for test purposes.
If you activate mode 2 or 3, the module does not transmit any
incoming image data. The module outputs correction data as
image data only.
Figure 22: Schematic process of two-point correction
Value Description
Table 32: Parameter E: values
Load process
Low light level reference image
A
Low light level ref. set value
J
Correction
data
0x ??????
...
...
Correction
data
0x ??????
0
0
n
n
High light level reference image
B
High light level ref. set value
K
Correction
data
0x ??????
...
...
Correction
data
0x ??????
0
0
n
n