Specifications

Example
The digital set value for the dark reference image is x = 410 = 0x19A.
>J=19A0[CR]
Recording of temporary reference images
(A, B, J, K)
For an optimal image quality both reference images of the two-point correction
may temporarily be replaced by newly recorded ones within the actual correc-
tion memory page S. For recording one requires a reference area with a spa-
tially constant brightness. The reference area is placed in front of the camera
filling the complete image and being out of focus of the lens. By assignment of
Bit position 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Value (12-bit)
2
11
2
10
2
9
2
8
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
----
x0
Table 33: J and K: bit usage
GigE Feature Name Feature Visibility Description
TPC_OperationMode Expert Operation mode of the two-point
correction.
(E=<value> command)
TPC_CorrectionData_FileNumber Expert File number of the flash file
containing the set values for the
two-point correction.
(N=<value> command)
TPC_SetValue_LowRef Expert Define the set value for the low
reference image of the two-point
correction.
(J=<value> command)
TPC_SetValue_HighRef Expert Define the set value for the high
reference image of the two-point
correction.
(K=<value> command)
TPC_FirstImage_LowRef Expert File number of the first low
reference image of the two-point
correction.
(A=<value> command)
TPC_FirstImage_HighRef Expert File number of the first high
reference image of the two-point
correction.
(B=<value> command)
Table 34: GigE feature: TwoPointCorrection (TPC)