Specifications

Appendix

Goldeye Technical Manual V2.4.0

AcquisitionControl

AnalogControls

Feature Description

AcquisitionMode This feature controls the acquisition mode of the software. This

feature works independently (!) of the chosen camera mode

(Continuous, IOD hardware trigger, IOD hardware timer). It

describes how many frames should be acquired.

AcquisitionStart Starts the image acquisition of the camera.

AcquisitionStop Stops the image acquisition of the camera.

TriggerMode Modifies the trigger mode of the camera. When the trigger mode

is Off, the camera will generate frames independently. When the

trigger mode is On the camera is switched to the so called IOD

(Image On Demand) mode. In this mode the camera waits for an

external trigger signal or an timer pulse. To control exposure and

dark time trigger mode must be switched to On.

ExposureMode Start or stop the internal exposure signal timer.

ExposureTime Sets the Exposure time (in microseconds).

ExposureTimeAbs Sets the Exposure time (in microseconds).

ExposureTimeGranularity Exposure time granularity.

ExposureTimeAbsMs Sets the Exposure time (in milliseconds).

DarkTime Sets the Dark time (in microseconds).

DarkTimeAbs Sets the Dark time (in microseconds).

DarkTimeGranularity Dark time granularity.

DarkTimeAbsMs Sets the Dark time (in milliseconds).

Table 48: Camera standard feature: AcquisitionControl

Feature Description

Gain This feature controls the selected gain as a raw integer value.

Table 49: Camera standard feature: AnalogControls