Technical information

Introduction
GigE Camera and Drivers Features V3.0.0
10
This document is a master document for all Allied Vision GigE camera models and is NOT camera specific
Introduction
The document describes the standard and advanced camera controls for Allied
Vision GigE cameras as seen from the Vimba Viewer.
This document applies to all GigE Vision camera families and is divided into two
main chapters:
•Chapter GigE camera and driver features describes the features for the fol-
lowing camera families using Allied Vision feature naming convention:
•Chapter GigE IR & scientific camera and driver features describes the fea-
tures for Goldeye G and Goldeye G Cool cameras using the GenICam stan-
dard feature naming convention.
–Bigeye G
–Mako G
–Manta
–Prosilica GB
–Prosilica GC
–Prosilica GE
–Prosilica GS
–Prosilica GT
–Prosilica GX
www

For more information on Allied Vision GigE cameras:
http://www.alliedvisiontec.com/emea/products/
cameras/gigabit-ethernet/manta
Note

This is the master document for all Allied Vision GigE camera
models. Some features are not available for all camera mod-
els.
Example:
• White balance is not available for monochrome cameras.
Some features are implemented in the cameras, but are not
always available.
Examples:
• Color correction features are implemented in Manta, Mako
G, and GT color cameras, but not the GB, GE, GC, GX cam-
eras.
• Color Correction is supported in Manta, Mako G and GT;
but it is not available in color cameras if they are oper-
ated with Bayer pixel formats, but works if debayering is
done within the camera.