Technical information

GigE camera and driver features
GigE Camera and Drivers Features V3.0.0
21
This document is a master document for all Allied Vision GigE camera models and is NOT camera specific
DSPSubregion
The automatic exposure, gain, white balance, and iris features can be config-
ured to respond only to a subregion within the image scene. This feature can be
used to choose a subregion that will 'meter' the rest of the image. This feature
works like the region metering on a photographic camera.
DSPSubregionBottom [Integer] R/W
Defines the bottom edge of the DSP subregion.
DSPSubregionLeft [Integer] R/W
Defines the left edge of the DSP subregion.
DSPSubregionRight [Integer] R/W
Defines the right edge of the DSP subregion.
DSPSubregionTop [Integer] R/W
Defines the top edge of the DSP subregion.
EdgeFilter [Enum] R/W
Image sharpness/blur. Applied post-Bayer interpolation. Only available on
color PixelFormats noted with on-camera interpolation.
DefectMaskEnable [Boolean] R/W
Enables or disables masking of defective pixel.
Gain12 Blue contribution to the green pixel (multiplicative factor)
Gain20 Red contribution to the blue pixel (multiplicative factor)
Gain21 Green contribution to the blue pixel (multiplicative factor)
Gain22 Blue contribution to the blue pixel (multiplicative factor)
Range: [0 – Sensor height] Default: Sensor height
Range: [0 – Sensor width] Default: 0
Range: [0 – Sensor width] Default: Sensor width
Range: [0 – Sensor height] Default: 0
Smooth2 Most blur
Smooth1 Slight blur
Off [Default] No blur or sharpness applied
Sharpen1 Slight sharp
Sharpen2 Most sharp
Note

EdgeFilter feature is applicable only to color
models/Manta cameras except dual-tap camera
models.
True [Default] Enables defect masking
False Disables defect masking