Technical information

GigE camera and driver features

GigE Camera and Drivers Features V3.0.0

This document is a master document for all Allied Vision GigE camera models and is NOT camera specific

ThresholdPWL2 [Integer] R/W

Valid only when ExposureMode = PieceWiseLinearHDR. The second

and lowest threshold level in PieceWiseLinearHDR. 0 = no light capacity,

63 = full pixel light capacity.

Shutter [Enum] R/W

Activate or deactivate the mechanical shutter of Bigeye G-629B Cool cameras.

GainControl/Gain

This feature controls the gain settings applied to the sensor.

Range: [0–63] Default: 63

Note



Setting ThresholdPWL2 above ThresholdPWL1 dis-

ables the second threshold of PieceWiseLinearHDR

mode.

Off Deactivate the mechanical shutter. Use this mode, if you

operate the camera with pulsed light sources

On [Default] Activate the mechanical shutter. If activated, the

mechanical shutter opens upon each exposure cycle and

closes again, when the exposure is over. Use this mode, if you

operate the camera with constant light sources, due to the

full frame sensor

SyncIn1 Enables or disables the mechanical shutter dependent on the

level of LineIn1

SyncIn2 Enables or disables the mechanical shutter dependent on the

level of LineIn2

SyncIn3 Enables or disables the mechanical shutter dependent on the

level of LineIn3

SyncIn4 Enables or disables the mechanical shutter dependent on the

level of LineIn4

SyncIn5 Enables or disables the mechanical shutter dependent on the

level of LineIn5

Note



The shutter feature is intended to control the exposure by

means of a mechanical shutter. It should not be confused

with any other exposure control feature.

The mechanical shutter is available ONLY on the Bigeye G-

629B Cool camera.