Technical information
GigE camera and driver features
GigE Camera and Drivers Features V3.0.0
37
This document is a master document for all Allied Vision GigE camera models and is NOT camera specific
EventNotification [Enum] R/W
Activates event notification on the GigE Vision message channel.
EventSelector [Enum] R/W
Selects a specific event to be enabled or disabled using EventNotifica-
tion. Possible values are listed as following:
EventsEnable1 [Integer] R/W
Default: 0. Bit field of all events. For example:
EventPtpSyncLost [Integer] R/C 40005
EventPtpSyncLocked [Integer] R/C 40006
EventLine1RisingEdge [Integer] R/C 40010
EventLine1FallingEdge[Integer] R/C 40011
EventLine2RisingEdge [Integer] R/C 40012
EventLine2FallingEdge [Integer] R/C 40013
EventLine3RisingEdge [Integer] R/C 40014
EventLine3FallingEdge[Integer] R/C 40015
EventLine4RisingEdge [Integer] R/C 40016
EventLine4FallingEdge [Integer] R/C 40017
EventFrameTriggerReady [Integer] R/C 40018
EventOverflow [Integer] R/C 65534
EventError [Integer] R/C 65535
Note
If you use the message channel for event notification,
you are always subscribed to EventOverflow and
EventError events.
Note
• There is no mechanism to detect the loss of
events during transportation.
• If misconfigured, cameras may produce lots of
events—more than a PC can handle.
Possible values: On, Off Default: Off
AcquisitionStart [Default] AcquisitionEnd
FrameTrigger ExposureEnd
AcquisitionRecordTrigger PtpSyncLost
PtpSyncLocked Line1RisingEdge
Line1FallingEdge Line2RisingEdge
Line2FallingEdge Line3RisingEdge
Line3FallingEdge Line4RisingEdge
Line4FallingEdge FrameTriggerReady
Bit 1 EventAcquisitionStart
Bit 2 EventAcquisitionEnd