Technical information

GigE camera and driver features

GigE Camera and Drivers Features V3.0.0

This document is a master document for all Allied Vision GigE camera models and is NOT camera specific

SyncIn

Signal source of the strobe timing unit. See SyncOutSource for descrip-

tions.

SyncInGlitchFilter [Integer] R/W

Ignores glitches on the SyncIn input line with pulse duration less than set

value.

SyncInLevels [Integer] R

A 4-bit register where each bit corresponds to a specific SyncIn input. For exam-

ple, when this value returns 2 (0010), SyncIn2 is high and all other Sync

input signals are low.

SyncInSelector [Enum] R/W

Select the sync-in line to control with SyncInGlitchFilter.

SyncOut

Used for synchronization with other cameras/devices or general purpose out-

puts.

SyncOutLevels [Integer] R/W

Output levels of hardware sync outputs, for output(s) in GPO mode.

SyncOutPolarity [Enum] R/W

Polarity applied to the sync-out line specified by SyncOutSelector.

SyncOutSelector [Enum] R/W

Selects the sync-out line to control with SyncOutSource, SyncOutPo-

larity.

Range: [0–50000] Default: 0 Unit: ns

Note



Setting SyncInGlitchFilter value increases latency of

FrameTrigger by same amount.

Possible values: SyncIn1, SyncIn2, SyncIn3, SyncIn4

Default: SyncIn1

Note



SyncOutPolarity can invert the SyncOutLevels.

Possible values: Normal, Invert Default: Normal

Possible values: SyncOut1, SyncOut2, SyncOut3, SyncOut4

Default: SyncOut1