Technical information

GigE camera and driver features
GigE Camera and Drivers Features V3.0.0
48
This document is a master document for all Allied Vision GigE camera models and is NOT camera specific
SyncOutSource [Enum] R/W
Signal source of the sync-out line specified by SyncOutSelector.
ImageFormat
Height [Integer] R/W
Height of image.
HeightMax [Integer] R
Maximum image height for the current image mode.
ImageSize [Integer] R
Size of images, in bytes, for the current format and size.
OffsetX [Integer] R/W
Starting column of the readout region (relative to the first column of the sen-
sor) in pixels.
GPO General purpose output
AcquisitionTriggerReady Active once the camera has been recognized by the host PC and is
ready to start acquisition
FrameTriggerReady Active when the camera is in a state that will accept the next frame
trigger
Exposing Active for the duration of sensor exposure
FrameReadout Active during frame readout, i.e. the transferring of image data
from the CCD to camera memory
Imaging Active when the camera is exposing or reading out frame data
Acquiring Active when acquisition start has been initiated
LineIn1 Active when there is an external trigger at Line1
LineIn2 Active when there is an external trigger at Line2
LineIn3 Active when there is an external trigger at Line3
LineIn4 Active when there is an external trigger at Line4
Strobe1 The output signal is controlled according to Strobe1 settings
CCDTemperatureOK Only for cameras that support this feature: indicates if camera has
reached the desired temperature value
Note

For detailed information see the camera waveform
diagrams provided in the camera manuals.
Range: [Camera dependent] Unit: Pixels
Range: [0 – Camera dependent] Default: 0 Unit: Pixels