Technical information

GigE camera and driver features
GigE Camera and Drivers Features V3.0.0
52
This document is a master document for all Allied Vision GigE camera models and is NOT camera specific
DecimationVertical [Integer] R/W
Decimation (also known as sub-sampling) is the process of skipping neighbor-
ing pixels (with the same color) while being read out from the CCD chip. Dec-
imationVertical controls the vertical sub-sampling of the image. There
is increase in frame rate with vertical sub-sampling.
ReverseX [Boolean] R/W
Flips the image sent by device horizontally. The region of interest (ROI) is
applied after flipping.
ReverseY [Boolean] R/W
Flips the image sent by device vertically. The region of interest (ROI) is applied
after flipping.
SensorHeight [Integer] R/C
The total number of pixel rows on the sensor.
Note
Writing an invalid number for DecimationHorizon-
tal will round up to next valid mode. For example, 5
rounds up to 8.
DecimationHorizontal and BinningHori-
zontal are mutually exclusive. Setting Decima-
tionHorizontal > 1 forces BinningHorizon-
tal to 1.
Range: [1–8] Default: 1
1 Off
2 2x reduction factor. 2 of 4 rows displayed
4 4x reduction factor. 2 of 8 rows displayed
8 8x reduction factor. 2 of 16 rows displayed
Note
Writing an invalid number for DecimationVertical
will round up to next valid mode. For example, 5 rounds
up to 8.
DecimationVertical and BinningVertical
are mutually exclusive. Setting DecimationVerti-
cal > 1 forces BinningVertical to 1.
www
For more information on the decimation process, see:
http://www.alliedvisiontec.com/fileadmin/content/PDF/
Support/Application_Notes/AppNote_-_Decimation.pdf
Possible values: True, False Default: False
Possible values: True, False Default: False