Technical information

GigE camera and driver features
GigE Camera and Drivers Features V3.0.0
54
This document is a master document for all Allied Vision GigE camera models and is NOT camera specific
SavedUserSets
Allied Vision GigE cameras are capable of storing a number of user-specified
configurations within the camera's non-volatile memory. These saved configu-
rations can be used to define the power-up settings of the camera or to quickly
switch between a number of predefined settings.
UserSetDefaultSelector [Enum] R/W
On power-up or reset, this user set is loaded.
UserSetLoad [Command]
Loads camera parameters from the user set specified by UserSetSelector.
UserSetSave [Command]
Saves camera parameters to the user set specified by UserSetSelector.
The Default setting cannot be overwritten.
UserSetSelector [Enum] R/W
Selects a user set, for loading or saving camera parameters.
Stream
Info
GVSPFilterVersion [String] R/C
Version of the GVSP Filter driver.
Multicast
Multicast mode allows the camera to send image data to all hosts on the same
subnet as the camera. The host computer (or Vimba Viewer application
instance) that first enables multicast mode is the master, and controls all cam-
era parameters. All other hosts/instances are the monitors, and can view image
data only.
Note

LUT features cannot be saved.
To save the content of a LUT, use Controls/LUTCon-
trol/LUTSave or LUTSaveAll.
Possible values: Default, UserSet1, UserSet2, UserSet3,
UserSet4, UserSet5
Possible values: Default, UserSet1, UserSet2, UserSet3,
UserSet4, UserSet5
Display name: GVSP Filter Version