Technical information
GigE camera and driver features
GigE Camera and Drivers Features V3.0.0
55
This document is a master document for all Allied Vision GigE camera models and is NOT camera specific
MulticastEnable [Boolean] R/W
Enables multicast mode. In multicast mode all computers on the same subnet
as the camera can receive image data from the camera MulticastIPAd-
dress.
MulticastIPAddress [Integer] R/C
Sets the multicast IP address.
Settings
Definition GVSP = GigE Vision Streaming Protocol
GVSPAdjustPacketSize [Command]
Requests the packet size used to be adjusted automatically.
GVSPBurstSize [Integer] R/W
Maximum number of GVSP packets to be processed in a burst.
GVSPDriverSelector [Enum] R/W
Streaming driver to be used.
GVSPHostReceiveBuffers [Integer] R/W
Number of buffers to be used by the network socket. Only applicable when not
using the Filter Driver.
Note
Most GigE switches support a maximum
PacketSize of 1500 in multicast mode.
Note
When using clients with Linux, you have to configure
the IP subsystem to process Multicast IP traffic.
Display name: Multicast Enable
Possible values: True, False Default: False
Display name: Multicast IP Address
Display name: GVSP Adjust Packet Size
Display name: GVSP Burst Size
Range: [1–256] Default: 32 Unit: GVSP Packets
Display name: GVSP Driver Selector
Possible values: Filter, Socket Default: Filter
Display name: GVSP Host Receive Buffers
Range: [256–2048] Default: 512