Technical information

GigE camera and driver features
GigE Camera and Drivers Features V3.0.0
58
This document is a master document for all Allied Vision GigE camera models and is NOT camera specific
StatPacketMissed [Integer] R
Number of packets missed since the start of imaging.
StatPacketReceived [Integer] R
Number of error-free packets received by the driver since the start of imaging,
this number should grow steadily during continuous acquisition.
StatPacketRequested [Integer] R
Number of missing packets that were requested to be resent from the device.
StatPacketResent [Integer] R
Number of packets resent by the camera since the start of imaging.
StatTimeElapsed [Float] R
Elapsed time (in seconds) since the streaming was started.
StreamInformation
StreamID [String] R
For Vimba v1.3 or higher only Device’s unique ID for the stream.
StreamType [Enum] R
For Vimba v1.3 or higher only Identifies the transport layer technology of the stream.
Display name: Stat Packets Missed
Note

If everything is configured correctly, this number
should remain zero, or at least very low compared
to StatPacketReceived.
Display name: Stat Packets Received
Display name: Stat Packets Requested
Note

If everything is configured correctly, this number
should remain zero, or at least very low compared
to StatPacketReceived.
Display name: Stat Packets Resent
Display name: Stat Time Elapsed
Display name: Stream ID
Display name: Stream Type