Technical information

GigE Camera and Drivers Features V3.0.0

GigE IR & scientific camera and driver features

This document is a master document for all Allied Vision GigE camera models and is NOT camera specific

NonImagePayloadSize [Integer] R

Maximum size of chunk data, not including the image chunk, in the image block

payload. If ChunkModeActive = False, NonImagePayloadSize = 0.

DeviceControl

BandwidthControlMode [Enum] R/W

Selects the desired mode of bandwidth control. Bandwidth allocation can be

controlled by DeviceLinkThroughputLimit or by SCPD0 register. If you

are not familiar with SCPD0 and how this driver uses this register, leave this fea-

ture set to DeviceLinkThroughputLimit.

DeviceFamilyName [String] R/C

Identifier of the product family of the device.

DeviceFanMode [Enum] R/W

Enables or disables the fan.

DeviceFanRpm [Integer] R

Current rotation speed of the fan.

DeviceFanSelector [Enum] R/W

Selects the fan to be controlled by DeviceFanMode and DeviceFanRpm.

DeviceFirmwareVersion [String] R/C

Firmware version of the device.

Unit: Bytes

DeviceLinkThroughputLimit [Default] See the

DeviceLinkThroughputLimit

feature for more information

SCPD Stream channel packet delay

expressed in timestamp counter units.

This mode may be used to limit the

rate of data from the camera to the

host. It works by inserting a delay

between successive stream channel

packets; for example, the longer the

delay, the slower the data rate. This

mode is NOT recommended

Both Implements a combination of control

modes.This mode is NOT recommended

On [Default] Turns the device fan on

Off Turns the device fan off

Range:[0 – Camera dependent] Unit: rpm

Possible values: Main