Technical information

GigE Camera and Drivers Features V3.0.0

GigE IR & scientific camera and driver features

This document is a master document for all Allied Vision GigE camera models and is NOT camera specific

DeviceRelativeHumidity [Float] R

Relative humidity, in percent, measured at the location selected in DeviceR-

elativeHumiditySelector.

DeviceRelativeHumiditySelector [Enum] R/W

Selects the location for measuring relative humidity.

DeviceSFNCVersionMajor [Integer] R/C

Major part of the SFNC version number (part before the decimal).

DeviceSFNCVersionMinor [Integer] R/C

Minor part of the SFNC version number (part after the decimal).

DeviceSFNCVersionSubMinor [Integer] R/C

Subordinate part of the firmware Minor number (part after the minor).

DeviceScanType [Enum] R/C

Scan type of the camera: Areascan.

DeviceSerialNumber [String] R/C

Serial number of the camera.

DeviceStreamChannelPacketSize [Integer] R/W

Specifies the stream packet size to send on the selected channel for the camera

or specifies the maximum packet size supported by the receiver.

DeviceStreamChannelSelector [Integer] R/W

Selects the stream channel to control.

DeviceTLType [Enum] R/C

Defines the transport layer type: GigEVision.

DeviceTemperature [Float] R

Device temperature, in °C, measured at the location selected by DeviceTem-

peratureSelector.

DeviceTemperatureSelector [Enum] R/W

Selects the location of temperature measurement points within the camera.

DeviceType [Enum] R

Type of the camera: Transmitter.

Possible value: Sensorboard

Range:[0 – Camera dependent] Default: 8999 Unit: Bytes

Range:[0 – Camera dependent] Default: 0

Possible values: Sensor, Sensorboard, Mainboard Default: Sensor