Technical information

GigE Camera and Drivers Features V3.0.0

GigE IR & scientific camera and driver features

This document is a master document for all Allied Vision GigE camera models and is NOT camera specific

EventSelector [Enum] R/W

Selects a specific event to be enabled or disabled using EventNotifica-

tion. Possible values are listed as following:

EventsEnable1 [Integer] R/W

Default: 0. Bit field of all events. For example:

This is an alternative to setting each event individually using the EventNo-

tification and EventSelector method.

FileAccessControl

FileAccessBuffer [Register] R/W

Defines the intermediate access buffer that allows the exchange of data

between the camera file storage and the application.

FileAccessLength [Integer] R/W

Controls the length of mapping between the camera file storage and the File-

AccessBuffer.

FileAccessOffset [Integer] R

Controls the offset of mapping between the camera file storage and the File-

AccessBuffer.

FileAttribute [Integer] R

Attribute of the currently selected file.

AcquisitionStart [Default] AcquisitionEnd

FrameTrigger ExposureEnd

AcquisitionRecordTrigger Line1RisingEdge

Line1FallingEdge Line2RisingEdge

Line2FallingEdge FrameTriggerReady

Bit 1 EventAcquisitionStart

Bit 2 EventAcquisitionEnd

Bit 3 EventFrameTrigger

Bit 19 EventFrameTriggerReady

Range: ≥ 0 Unit: Bytes

Range: ≥ 0 Default: 0 Unit: Bytes

Bit 0–1 These two bits are used to encode the privilege level for a file.

It defines the owner of the file:

• 0 = [Default] User owns the file. User can overwrite/

delete the file

• 1 = For factory personnel use only

• 2, 3 = Reserved

Bit 2–31 Reserved, always 0