Technical information

GigE Camera and Drivers Features V3.0.0
75
GigE IR & scientific camera and driver features
This document is a master document for all Allied Vision GigE camera models and is NOT camera specific
FileTypeBuffer [Integer] R/(W)
Contains the type that will be used for newly created files when FileOpera-
tionSelector = WriteType.
GigE
Configuration
GevIPConfigurationMode [Enum] R/W
Current IP configuration mode.
Current
GevCurrentDefaultGateway [Integer] R
IP address of the default Gateway of the device.
GevCurrentIPAddress [Integer] R
Current IP address of the device.
GevCurrentSubnetMask [Integer] R
Current Subnet Mask of the device.
GVCP
Definition GVCP = GigE Vision Control Protocol
Allied Vision GigE IR and scientific cameras have a sophisticated real time
resend mechanism that ensures a high degree of data integrity.
GVCPCmdRetries [Integer] R/W
Controls the maximum number of resend requests that the host will attempt
when trying to recover a lost packet.
GVCPCmdTimeout [Integer] R/W
Timeout waiting for an answer from the device.
Possible values:
– 0x1000 = Non-uniformity correction data
– 0x2000 = Defect pixel correction data
Display name: IP Configuration Mode
Possible values: LLA, DHCP, Persistent
Display name: Current Default Gateway
Display name: Current IP Address
Display name: Current Subnet Mask
Display name: Command Retries
Range:[1–9] Default: 5
Display name: Command Timeout
Range:[100–1000] Default: 250 Unit: ms