Technical information

GigE Camera and Drivers Features V3.0.0

GigE IR & scientific camera and driver features

This document is a master document for all Allied Vision GigE camera models and is NOT camera specific

NUCDatasetActiveDescription [String] R

Gives a short descriptive label to the data set that is currently indexed by NUC-

DatasetActive. For example: Gain 0, 15.000°C, 1000µs.

NUCDatasetActiveExposureTime [Float] R

Shows exposure time at acquisition of the data set that is currently indexed by

NUCDatasetActive. The data set should be selected so that the actual

exposure time setting corresponds to the reference value.

NUCDatasetActiveGain [Float] R

SensorGain setting at acquisition of the data set that is currently indexed by

NUCDatasetActive. The data set should be selected so that the actual sen-

sor gain setting corresponds to the reference value.

NUCDatasetActiveTemperature [Float] R

Shows sensor temperature, in °C, at acquisition of the data set that is currently

indexed by NUCDatasetActive. The data set should be selected so that the

actual sensor temperature is close to the reference temperature.

Note



This text is intended for informational purposes in the user

interface display only!

For the actual values refer to NUCDatasetActiveExpo-

sureTime, NUCDatasetActiveGain, and NUCData-

setActiveTemperature

Note



The number of distinct reference values is limited by available

correction data, depending on the camera variant.

0 SensorGain = LowGain

1 SensorGain = HighGain

Note



The number of distinct reference values is limited by available

correction data, depending on the camera variant.

Note



The number of distinct reference values is limited by available

correction data, depending on the camera variant.