Technical information

GigE Camera and Drivers Features V3.0.0

GigE IR & scientific camera and driver features

This document is a master document for all Allied Vision GigE camera models and is NOT camera specific

NUCDatasetTemperature [Float] R

Sensor temperature, in °C, at acquisition of the data set indexed by NUCData-

setSelector. The data set should be selected so that the actual sensor tem-

perature is close to the reference temperature.

NUCMode [Enum] R/W

Controls the operating mode of the non-uniformity correction. Depending on

the factory-provided correction data, different modes may be available.

ImageFormatControl

Height [Integer] R/W

Height of image.

HeightMax [Integer] R

Maximum image height for the current image mode.

ImageSize [Integer] R

Size of images, in bytes, for the current format and size.

OffsetX [Integer] R/W

Starting column of the readout region (relative to the first column of the sen-

sor) in pixels.

OffsetY [Integer] R/W

Starting row of the readout region (relative to the first row of the sensor) in pix-

els.

Note



The number of distinct reference values is limited by available

correction data, depending on the camera variant.

Off Non-uniformity correction is off

OnePoint Only one reference point is used for correction

TwoPoint [Default] Two reference points are used for correction

ThreePoint Three reference points are used for correction

Range: [Camera dependent]

Range: [0 – Camera dependent] Default: 0