Technical information

GigE Camera and Drivers Features V3.0.0
85
GigE IR & scientific camera and driver features
This document is a master document for all Allied Vision GigE camera models and is NOT camera specific
StatFrameDelivered [Integer] R
Number of error-free frames captured since the start of imaging.
StatFrameDropped [Integer] R
Number of incomplete frames received by the host due to missing packets (not
including shoved frames).
StatFrameRescued [Integer] R
Number of frames that initially had missing packets but were successfully
completed after packet resend.
StatFrameShoved [Integer] R
Number of frames dropped because the transfer of a following frame was com-
pleted earlier.
StatFrameUnderrun [Integer] R
Number of frames missed due to the non-availability of a user supplied buffer.
StatLocalRate [Float] R
Inverse of time interval between the last two frames (faulty or not) received by
the host. No averaging is performed.
StatPacketErrors [Integer] R
Number of improperly formed packets. If this number is non-zero, it suggests a
possible cable or camera hardware failure.
StatPacketMissed [Integer] R
Number of packets missed since the start of imaging.
Display name: Stat Frames Delivered
Display name: Stat Frames Dropped
Display name: Stat Frames Rescued
Display name: Stat Frames Shoved
Display name: Stat Frames Underrun
Display name: Stat Local Rate
Note

In case of error-free frame reception, StatLocalRate is
similar to StatFrameRate, except that the host clock is
used instead of frame timestamps for measuring the time
interval between frames.
Otherwise, StatLocalRate and StatFrameRate may
differ significantly.
Display name: Stat Packets Errors
Display name: Stat Packets Missed
Note

If everything is configured correctly, this number
should remain zero, or at least very low compared
to StatPacketReceived.