Technical information

GigE Camera and Drivers Features V3.0.0
88
GigE IR & scientific camera and driver features
This document is a master document for all Allied Vision GigE camera models and is NOT camera specific
StreamHoldEnable [Enum] R/W
Control on-camera image storage; this control is like a “pause” button for the
image stream.
UserSetControl
UserSetDefaultSelector [Enum] R/W
Selects the user set to be loaded on power-up or reset.
UserSetLoad [Command]
Loads camera parameters from the user set specified by UserSetSelector.
UserSetSave [Command]
Saves camera parameters to the user set specified by UserSetSelector.
The Default setting cannot be overwritten.
UserSetSelector [Enum] R/W
Selects a user set, for loading or saving camera parameters.
On Images remain stored on the camera, and
are not transmitted to the host
Off [Default] The image stream resumes, and
any stored images are sent to the host
Possible values:
Default, UserSet1, UserSet2, UserSet3, UserSet4
Possible values: Default, UserSet1, UserSet2, UserSet3, UserSet4