Technical information

Introduction
AVT GigE Camera and Drivers Features V2.0.0
10
This document is a master document for all AVT GigE camera models and is NOT camera specific
Introduction
The document describes the standard and advanced camera controls for AVT
GigE cameras as seen from the AVT Vimba Viewer.
This document applies to all AVT GigE Vision camera families and is divided into
two main chapters:
•Chapter AVT GigE camera and driver features describes the features for the
following camera families using AVT feature naming convention:
•Chapter AVT GigE IR & scientific camera and driver features describes the
features for AVT’s newest GigE camera, Goldeye G, using the GenICam
standard feature naming convention.
–Bigeye G
–Mako G
–Manta
–Prosilica GB
–Prosilica GC
–Prosilica GE
–Prosilica GS
–Prosilica GT
–Prosilica GX
www

For more information on AVT GigE cameras:
http://www.alliedvisiontec.com/emea/products/
cameras/gigabit-ethernet/manta
Note

This is the master document for all AVT GigE camera models.
Some features are not available for all camera models.
Example:
• White balance is not available for monochrome cameras.
Some features are implemented in the cameras, but are not
always available.
Examples:
• Color correction features are implemented in Manta, Mako
G, and GT color cameras, but not the GB, GE, GC, GX cam-
eras.
• Color Correction is supported in Manta, Mako G and GT;
but it is not available in color cameras if they are oper-
ated with Bayer pixel formats, but works if debayering is
done within the camera.