Technical information

AVT GigE camera and driver features

AVT GigE Camera and Drivers Features V2.0.0

This document is a master document for all AVT GigE camera models and is NOT camera specific

ColorTransformationSelector [Enum] R/W

Selects which color transformation module is controlled by the various color

transformation features.

ColorTransformationValue [Float] R/W

Represents the value of the selected gain factor or offset inside the transforma-

tion matrix.

ColorTransformationValueSelector [Enum] R/W

Selects the gain factor or offset of the transformation matrix if ColorTrans-

formationMode = Manual

DSPSubregion

The automatic exposure, gain, white balance, and iris features can be config-

ured to respond only to a subregion within the image scene. This feature can be

used to choose a subregion that will 'meter' the rest of the image. This feature

works like the region metering on a photographic camera.

DSPSubregionBottom [Integer] R/W

Defines the bottom edge of the DSP subregion.

DSPSubregionLeft [Integer] R/W

Defines the left edge of the DSP subregion.

DSPSubregionRight [Integer] R/W

Defines the right edge of the DSP subregion.

DSPSubregionTop [Integer] R/W

Defines the top edge of the DSP subregion.

Possible values: RGBtoRGB

Range: [-2–2] Default: 1

Gain00 [Default] Red contribution to the red pixel (multiplicative factor)

Gain01 Green contribution to the red pixel (multiplicative factor)

Gain02 Blue contribution to the red pixel (multiplicative factor)

Gain10 Red contribution to the green pixel (multiplicative factor)

Gain11 Green contribution to the green pixel (multiplicative factor)

Gain12 Blue contribution to the green pixel (multiplicative factor)

Gain20 Red contribution to the blue pixel (multiplicative factor)

Gain21 Green contribution to the blue pixel (multiplicative factor)

Gain22 Blue contribution to the blue pixel (multiplicative factor)

Range: [0 – Sensor height] Default: Sensor height

Range: [0 – Sensor width] Default: 0

Range: [0 – Sensor width] Default: Sensor width

Range: [0 – Sensor height] Default: 0