Technical information

AVT GigE camera and driver features

AVT GigE Camera and Drivers Features V2.0.0

This document is a master document for all AVT GigE camera models and is NOT camera specific

EdgeFilter [Enum] R/W

Image sharpness/blur. Applied post-Bayer interpolation. Only available on

color PixelFormats noted with on-camera interpolation.

DefectMask

Some larger format sensors may contain defective columns. Class 1 and Class 0

sensors are available with no defective columns.

DefectMaskColumnEnable [Enum] R/W

Defect masking replaces defective columns with interpolated values based on

neighboring columns. Defective columns are detected and recorded at the fac-

tory.

DefectMaskPixelEnable [Enum] R/W

Currently NOT implemented.

Exposure

ExposureAuto [Enum] R/W

Auto algorithms use information from the camera’s current image and apply the

following settings to the next image. Large changes in scene lighting may

require several frames for the algorithm to stabilize.

Smooth2 Most blur

Smooth1 Slight blur

Off [Default] No blur or sharpness applied

Sharpen1 Slight sharp

Sharpen2 Most sharp

Note



EdgeFilter feature is applicable only to color

models/Manta cameras except dual-tap camera

models.

www



See the AVT modular concept document, or contact your AVT

sales representative for more information:

http://www.alliedvisiontec.com/us/support/downloads/

product-literature/avt-modular-concept.html

Enabled [Default] Enables masking of defective columns

Disabled Disables masking of defective columns

Off [Default] The automatic mode is Off

Once Auto-exposure occurs until target is achieved, then

ExposureAuto returns to Off