Technical information

AVT GigE camera and driver features

AVT GigE Camera and Drivers Features V2.0.0

This document is a master document for all AVT GigE camera models and is NOT camera specific

ExposureAutoMin [Integer] R/W

The lower bound to the exposure setting in auto exposure mode.

ExposureAutoOutliers [Integer] R/W

The total pixels from top of the distribution that are ignored by the auto expo-

sure algorithm.

ExposureAutoRate [Integer] R/W

The rate at which the auto exposure function changes the exposure set-

ting.100% is auto exposure adjustments running at full speed, and 50% is half

speed.

ExposureAutoTarget [Integer] R/W

The general lightness or darkness of the auto exposure feature; specifically the

target mean histogram level of the image—0 being black, 100 being white.

ExposureMode [Enum] R/W

Control for exposure duration.

ExposureTimeAbs [Float] R/W

The sensor integration time.

Shutter [Enum] R/W

Activate or deactivate the mechanical shutter of Bigeye G-629B Cool cameras.

Range: [Camera dependent] Default: Camera dependent Units: µs

Range: [0–1000] Default: 0 Units: 0.01% i.e. 1000 = 10%

Range: [1–100] Default: 100 Units: Percent

Range: [0–100] Default: 50 Units: Percent

Timed [Default] The camera exposure time is set by ExposureTimeAbs

Range: [Camera dependent] Units: µs

Off Deactivate the mechanical shutter. Use this mode, if you

operate the camera with pulsed light sources

On [Default] Activate the mechanical shutter. If activated, the

mechanical shutter opens upon each exposure cycle and

closes again, when the exposure is over. Use this mode, if you

operate the camera with constant light sources, due to the

full frame sensor

SyncIn1 Enables or disables the mechanical shutter dependent on the

level of LineIn1

SyncIn2 Enables or disables the mechanical shutter dependent on the

level of LineIn2

SyncIn3 Enables or disables the mechanical shutter dependent on the

level of LineIn3

SyncIn4 Enables or disables the mechanical shutter dependent on the

level of LineIn4

SyncIn5 Enables or disables the mechanical shutter dependent on the

level of LineIn5