Technical information

AVT GigE camera and driver features

AVT GigE Camera and Drivers Features V2.0.0

This document is a master document for all AVT GigE camera models and is NOT camera specific

For Manta type A If Gamma is ON, LUT 1 is used to do the gamma transform. The original LUT val-

ues will be stored temporarily. If Gamma is ON, and you read out LUT1: you only

get stored LUT values but not Gamma values. In general, Gamma values can‘t be

read out.

If Gamma is OFF, LUT position 1 contains optional user defined LUT values.

Hue [Float] R/W

Alters color of image without altering white balance. Takes float input,

although rounds to integer. Only valid when using on-camera interpolated

PixelFormats .

IODMode [Enum] R/W

Set camera to continuous or Image on Demand (IOD) mode.

Note



Manta type B, Mako G, and Prosilica GT cameras have

a stand-alone gamma function which does not share

resources with LUTs.

Range: Camera dependent Default: 0.00 Units: Degrees

Continuous

• The camera requires no external exposure signal

• The camera generates a constant exposure time inde-

pendently. The exposure time is equal to frame readout

time and cannot be adjusted

Bigeye G-132B Cool, Bigeye G-283B Cool, and Bigeye G-

1100B Cool achieve maximum frame rate in continuous

mode only.

IOD [Default] Enables IOD mode. In this mode the camera needs

an external trigger signal or a timer driven internal expo-

sure signal

LineIn1 The camera is switched between IOD and Continuous

mode, dependent on the level of LineIn1

LineIn2 The camera is switched between IOD and Continuous

mode, dependent on the level of LineIn2

LineIn3 The camera is switched between IOD and Continuous

mode, dependent on the level of LineIn3

LineIn4 The camera is switched between IOD and Continuous

mode, dependent on the level of LineIn4

LineIn5 The camera is switched between IOD and Continuous

mode, dependent on the level of LineIn5

Note



If Continuous mode is activated, no external expo-

sure signal is allowed. Set e.g. TriggerSelector

to FrameStart and TriggerSource to an

unused external trigger Line.