Technical information

AVT GigE camera and driver features
AVT GigE Camera and Drivers Features V2.0.0
31
This document is a master document for all AVT GigE camera models and is NOT camera specific
Whitebalance
BalanceRatioAbs [Float] R/W
Adjusts the gain of the channel selected in the BalanceRatioSelector.
BalanceRatioAbs = 1.00 means no gain is applied.
BalanceRatioSelector [Enum] R/W
Select the Red or Blue channel to adjust with BalanceRatioAbs.
BalanceWhiteAuto [Enum] R/W
Auto algorithms use information from the camera’s current image and apply the
following settings to the next image; i.e., the camera must be acquiring images
in order for the auto algorithm to update. Large changes in scene lighting may
require 2-3 frames for the algorithm to stabilize.
You can configure the auto white balance feature to respond only to a subregion
within the image scene. This subregion can be configured with the DSPSub-
region feature.
BalanceWhiteAutoControl
BalanceWhiteAutoAdjustTol [Integer] R/W
Tolerance allowed from the ideal white balance values, within which the auto
white balance does not run. It is used to limit white balance setting changes to
only larger variations in color.
Range: [Camera dependent]
Note
The green channel gain is always 1.00, as this is the lumi-
nance/reference channel. To increase/decrease green,
decrease/increase red and blue accordingly.
Possible values: Red, Blue Default: Red
Off [Default] Auto white balance is off. White balance can be
adjusted directly by changing the BalanceRatioSe-
lector and BalanceRatioAbs
Once A single iteration of the auto white balance algorithm is run,
and then BalanceWhiteAuto returns to Off. The Once
function operates according to the ExposureAuto and
DSPSubregion controls
Continuous White balance will continuously adjust according to the
current scene. The continuous function operates
according to the ExposureAuto and DSPSubregion
controls
Range: [0–50] Default: 5 Units: Percent