Technical information

AVT GigE camera and driver features
AVT GigE Camera and Drivers Features V2.0.0
33
This document is a master document for all AVT GigE camera models and is NOT camera specific
EventID
EventNotification [Enum] R/W
Activates event notification on the GigE Vision message channel.
EventSelector [Enum] R/W
Selects a specific event to be enabled or disabled using EventNotifica-
tion. Possible values are listed as following:
EventAcquisitionStart [Integer] R/C 40000
EventAcquisitionEnd [Integer] R/C 40001
EventFrameTrigger [Integer] R/C 40002
EventExposureEnd [Integer] R/C 40003
EventAcquisitionRecordTrigger [Integer] R/C 40004
EventPtpSyncLost [Integer] R/C 40005
EventPtpSyncLocked [Integer] R/C 40006
EventLine1RisingEdge [Integer] R/C 40010
EventLine1FallingEdge[Integer] R/C 40011
EventLine2RisingEdge [Integer] R/C 40012
EventLine2FallingEdge [Integer] R/C 40013
EventLine3RisingEdge [Integer] R/C 40014
EventLine3FallingEdge[Integer] R/C 40015
EventLine4RisingEdge [Integer] R/C 40016
EventLine4FallingEdge [Integer] R/C 40017
EventFrameTriggerReady [Integer] R/C 40018
EventOverflow [Integer] R/C 65534
EventError [Integer] R/C 65535
Note
If you use the message channel for event notification,
you are always subscribed to EventOverflow and
EventError events.
Note
There is no mechanism to detect the loss of
events during transportation.
If misconfigured, cameras may produce lots of
events—more than a PC can handle.
Possible values: On, Off Default: Off
AcquisitionStart [Default] AcquisitionEnd
FrameTrigger ExposureEnd
AcquisitionRecordTrigger PtpSyncLost
PtpSyncLocked Line1RisingEdge
Line1FallingEdge Line2RisingEdge
Line2FallingEdge Line3RisingEdge
Line3FallingEdge Line4RisingEdge
Line4FallingEdge FrameTriggerReady