Technical information

AVT GigE camera and driver features
AVT GigE Camera and Drivers Features V2.0.0
36
This document is a master document for all AVT GigE camera models and is NOT camera specific
Current
GevCurrentDefaultGateway [Integer] R
IP address of the default Gateway of the device.
GevCurrentIPAddress [Integer] R
Current IP address of the device.
GevCurrentSubnetMask [Integer] R
Current Subnet Mask of the device.
GVCP
Definition GVCP = GigE Vision Control Protocol
AVT GigE cameras have a sophisticated real time resend mechanism that ensures
a high degree of data integrity.
GVCPCmdRetries [Integer] R/W
Controls the maximum number of resend requests that the host will attempt
when trying to recover a lost packet.
GVCPCmdTimeout [Integer] R/W
Timeout waiting for an answer from the device.
GevHeartbeatInterval [Integer] R/W
For Vimba v1.3 or higher only The driver sends heartbeat packets to the camera every GevHeartbeatIn-
terval milliseconds.
GevHeartbeatTimeout [Integer] R/W
For Vimba v1.3 or higher only The driver sends heartbeat packets to the camera. If a heartbeat packet is not
received within GevHeartbeatTimeout, the camera assumes the host has
closed its controlling application or is dead, and closes its stream and control
channel.
This parameter may need to be increased if stepping through code in a debug-
ger, as this prevents the driver from sending heartbeat packets.
Display name: Current Default Gateway
Display name: Current IP Address
Display name: Current Subnet Mask
Display name: Command Retries
Range:[1–10] Default: 5
Display name: Command Timeout
Range:[100–1000] Default: 250 Units: ms
Display name: Heartbeat Interval
Units: ms
Display name: Heartbeat Interval
Range:[500–10000] Default: 3000 Units: ms