Technical information

AVT GigE camera and driver features
AVT GigE Camera and Drivers Features V2.0.0
53
This document is a master document for all AVT GigE camera models and is NOT camera specific
StatPacketMissed [Integer] R
The number of packets missed since the start of imaging.
StatPacketReceived [Integer] R
Indicates the number of packets received by the driver since the start of imag-
ing, this number should grow steadily during continuous acquisition.
StatPacketRequested [Integer] R
When an expected packet is not received by the driver, it is recognized as miss-
ing and the driver requests the camera to resend it. The resend mechanism
ensures very high data integrity.
StatPacketResent [Integer] R
The number of packets resent by the camera since the start of imaging.
StatTimeElapsed [Float] R
Elapsed time (in seconds) since the streaming was started.
StreamInformation
StreamID [String] R
For Vimba v1.3 or higher only Device’s unique ID for the stream.
StreamType [Enum] R
For Vimba v1.3 or higher only Identifies the transport layer technology of the stream.
Display name: Stat Packets Missed
Note

If everything is configured correctly, this number
should remain zero, or at least very low compared
to StatPacketReceived.
Display name: Stat Packets Received
Display name: Stat Packets Requested
Note

If everything is configured correctly, this number
should remain zero, or at least very low compared
to StatPacketReceived.
Display name: Stat Packets Resent
Display name: Stat Time Elapsed
Display name: Stream ID
Display name: Stream Type