Technical information

AVT GigE IR & scientific camera and driver features

AVT GigE Camera and Drivers Features V2.0.0

This document is a master document for all AVT GigE camera models and is NOT camera specific

AVT GigE IR & scientific camera and

driver features

AVT Goldeye is a short-wave infrared GigE camera that provides a comprehen-

sive and advanced set of features for infrared imaging requirements. This chap-

ter describes the standard and advanced camera controls, as seen from the AVT

Vimba Viewer, for Goldeye cameras using the GenICam standard feature nam-

ing convention.

AcquisitionControl

This group of controls relates to image acquisition.

AcquisitionAbort [Command]

Software command to stop camera from receiving frame triggers and abort the

current acquisition. A partially transferred image will be completed.

AcquisitionFrameCount [Integer] R/W

Defines the number of frames to capture in a limited sequence of images. Used

with AcquisitionMode = MultiFrame and Recorder. In Recorder

mode, AcquisitionFrameCount cannot exceed StreamHoldCapac-

ity.

AcquisitionFrameRate [Float] R/W

When TriggerSelector = FrameStart and either TriggerMode =

Off or TriggerSource = FixedRate, this control specifies the frame

rate. Depending on the exposure duration, the camera may not achieve the

frame rate set here.

AcquisitionFrameRateLimit [Float] R

The maximum frame rate possible for the current exposure duration and image

format.

Range:[1–65535] Default: 1 Units: Frames

Range: [Camera dependent] Units: Frames per second