Technical information

AVT GigE IR & scientific camera and driver features
AVT GigE Camera and Drivers Features V2.0.0
56
This document is a master document for all AVT GigE camera models and is NOT camera specific
ExposureMode [Enum] R/W
Control for exposure duration.
ExposureTime [Float] R/W
The sensor integration time.
RecorderPreEventCount [Integer] R/W
Valid when AcquisitionMode = Recorder. The number of frames
returned before the AcquisitionRecord trigger event, with Aquisi-
tionFrameCount minus RecorderPreEventCount frames being
returned after the AcquisitionRecord trigger event.
TriggerActivation [Enum] R/W
Type of activation, for hardware triggers. This controls edge/level and polarity
sensitivities.
Continuous The exposure time will vary continuously according to the
scene illumination.
other The exposure time will be controlled by an external signal
appearing on Line1 or Line2. In order for this feature
to work, TriggerSelector = FrameStart and
TriggerSource must be set to Line1 or Line2
Note
The camera must be acquiring images in order
for the auto algorithm to update.
Timed [Default] The camera exposure time is set by ExposureTime
Range: [Camera dependent] Units: µs
Range:[0 – 65535] Default: 0 Units: Frames
Note
At least one image must be captured after the
AcquisitionRecord trigger event, i.e., you
cannot set RecorderPreEventCount = 1,
and AcquisitionFrameCount = 1.
RisingEdge [Default] Rising edge trigger
FallingEdge Falling edge trigger
AnyEdge Rising or falling edge
LevelHigh Active high signal
LevelLow Active low signal