Technical information

AVT GigE IR & scientific camera and driver features

AVT GigE Camera and Drivers Features V2.0.0

This document is a master document for all AVT GigE camera models and is NOT camera specific

LineOutPolarity [Enum] R/W

Polarity applied to the LineOut specified by LineOutSelector.

LineOutSelector [Enum] R/W

Selects the LineOut to control with LineOutSource, LineOutPolar-

ity.

LineOutSource [Enum] R/W

Signal source of the LineOut line specified by LineOutSelector.

Note



LineOutPolarity can invert the LineOutLevels.

Possible values: Normal, Invert Default: Normal

Possible values: LineOut1, LineOut2, LineOut3, LineOut4

Default: LineOut1

GPO General purpose output

AcquisitionTriggerReady Active once the camera has been recognized by the host PC and is

ready to start acquisition

FrameTriggerReady Active when the camera is in a state that will accept the next frame

trigger

Exposing [Default] Active for the duration of sensor exposure

FrameReadout Active during frame readout, i.e. the transferring of image data

from the CCD to camera memory

Imaging Active when the camera is exposing or reading out frame data

Acquiring Active when acquisition start has been initiated

LineIn1 Active when there is an external trigger at Line1

LineIn2 Active when there is an external trigger at Line2

LineIn3 Active when there is an external trigger at Line3

LineIn4 Active when there is an external trigger at Line4

Strobe1 The output signal is controlled according to Strobe1 settings

Note



For detailed information see the camera waveform

diagrams provided in the camera manuals.