Technical information

AVT GigE IR & scientific camera and driver features

AVT GigE Camera and Drivers Features V2.0.0

This document is a master document for all AVT GigE camera models and is NOT camera specific

EventNotification [Enum] R/W

Activates event notification on the GigE Vision message channel.

EventSelector [Enum] R/W

Selects a specific event to be enabled or disabled using EventNotifica-

tion. Possible values are listed as following:

EventsEnable1 [Integer] R/W

Default: 0. Bit field of all events. For example:

This is an alternative to setting each event individually using the EventNo-

tification and EventSelector method.

FileAccessControl

FileAccessBuffer [Register] R/W

Defines the intermediate access buffer that allows the exchange of data

between the camera file storage and the application.

FileAccessLength [Integer] R/W

Controls the length of mapping between the camera file storage and the File-

AccessBuffer.

FileAccessOffset [Integer] R/W

Controls the offset of mapping between the camera file storage and the File-

AccessBuffer.

Possible values: On, Off Default: Off

AcquisitionStart [Default] AcquisitionEnd

FrameTrigger ExposureEnd

AcquisitionRecordTrigger Line1RisingEdge

Line1FallingEdge Line2RisingEdge

Line2FallingEdge Line3RisingEdge

Line3FallingEdge Line4RisingEdge

Line4FallingEdge FrameTriggerReady

Bit 1 EventAcquisitionStart

Bit 2 EventAcquisitionEnd

Bit 3 EventFrameTrigger

Bit 19 EventFrameTriggerReady

Range: Camera dependent Units: Byte

Range: ≥ 0 Units: Byte

Range: ≥ 0 Default: 0 Units: Byte