Technical information

AVT GigE IR & scientific camera and driver features
AVT GigE Camera and Drivers Features V2.0.0
70
This document is a master document for all AVT GigE camera models and is NOT camera specific
FileStatus [Enum] R
Presents the status of the file
FileType [Integer] R
Type of currently selected file.
FileTypeBuffer [Integer] R/(W)
Contains the type that will be used for newly created files when FileOpera-
tionSelector = WriteType.
GigE
Configuration
GevIPConfigurationMode [Enum] R/W
Current IP configuration mode.
Current
GevCurrentDefaultGateway [Integer] R
IP address of the default Gateway of the device.
GevCurrentIPAddress [Integer] R
Current IP address of the device.
GevCurrentSubnetMask [Integer] R
Current Subnet Mask of the device.
GVCP
Definition GVCP = GigE Vision Control Protocol
AVT GigE IR and scientific cameras have a sophisticated real time resend mech-
anism that ensures a high degree of data integrity.
GVCPCmdRetries [Integer] R/W
Controls the maximum number of resend requests that the host will attempt
when trying to recover a lost packet.
Possible values: Closed, Open
Possible values:
– 0x1000 = Non-uniformity correction data
– 0x2000 = Defect pixel correction data
Display name: IP Configuration Mode
Possible values: LLA, DHCP, Persistent
Display name: Current Default Gateway
Display name: Current IP Address
Display name: Current Subnet Mask
Display name: Command Retries
Range:[1–10] Default: 5