Technical information

AVT GigE IR & scientific camera and driver features
AVT GigE Camera and Drivers Features V2.0.0
72
This document is a master document for all AVT GigE camera models and is NOT camera specific
Persistent
GevPersistentDefaultGateway [Integer] R/W
Persistent default gateway of the device.
GevPersistentIPAddress [Integer] R/W
Persistent IP address of the device.
GevPersistentSubnetMask [Integer] R/W
Persistent subnet mask of the device.
ImageCorrectionControl
DefectPixelCorrection
DPCDatasetActivate [Command]
Activates the dataset that is currently indexed by DPCDatasetSelector.
DPCDatasetActive [Integer] R
The index of the active data set, starting at 0. The maximum possible value of
DPCDatasetActive depends on the number of valid data sets in the cam-
era. The mapping of an index value to a specific correction data file may vary
from camera to camera or after correction data modifications.
Use the DPCDatasetSelector and corresponding features to retrieve
more information about the data sets.
DPCDatasetDescription [String] R
This text corresponds to the file description in the file system of the camera.
DPCDatasetSelector [Integer] R/W
Selects a data set for access. The maximum possible value of DPCDataset-
Selector depends on the number of valid data sets in the camera. The map-
ping of an index value to a specific correction data file may vary from camera to
camera or after correction data modifications.
DPCMode [Enum] R/W
Configures the mode of the defect pixel correction.
Note

If you are seeing all black images, or all frames reported
as StatFrameDropped and zero images reported as
StatFrameDelivered, you will likely need to
decrease this parameter.
Display name: Persistent Default Gateway
Display name: Persistent IP Address
Display name: Persistent Subnet Mask
Range: [0 – Camera dependent]
Values: [0 – Camera dependent] Default: Camera dependent
Possible values: Off, On Default: On