Technical information

AVT GigE IR & scientific camera and driver features
AVT GigE Camera and Drivers Features V2.0.0
77
This document is a master document for all AVT GigE camera models and is NOT camera specific
Stream
Info
GVSPFilterVersion [String] R/C
Version of the GVSP Filter driver.
Multicast
Multicast mode allows the camera to send image data to all hosts on the same
subnet as the camera. The host computer (or AVT Vimba Viewer application
instance) that first enables multicast mode is the master, and controls all cam-
era parameters. All other hosts/instances are the monitors, and can view image
data only.
MulticastEnable [Boolean] R/W
Enables multicast mode. In multicast mode all computers on the same subnet
as the camera can receive image data from the camera MulticastIPAd-
dress.
MulticastIPAddress [Integer] R/C
Sets the multicast IP address.
Settings
Definition GVSP = GigE Vision Streaming Protocol
GVSPAdjustPacketSize [Command]
Requests the packet size used to be adjusted automatically.
GVSPBurstSize [Integer] R/W
Maximum number of GVSP packets to be processed in a burst.
Display name: GVSP Filter Version
Note

Most GigE switches support a maximum packet
size of 1500 in multicast mode.
Note

When using clients with Linux, you have to configure
the IP subsystem to process Multicast IP traffic.
Display name: Multicast Enable
Possible values: True, False Default: False
Display name: Multicast IP Address
Display name: GVSP Adjust Packet Size
Display name: GVSP Burst Size
Range: [1–256] Default: 32 Units: GVSP Packets