Specifications

Appendix
Pearleye Technical Manual V2.3.0
81
CameraSpecialFeatures\TwoPointCorrection
CameraSpecialFeatures\BackgroundCorrection
CameraSpecialFeatures\LUT
Feature Description
TPC_OperationMode Operation mode of the two-point correction.
(E=<value> command)
TPC_CorrectionData_FileNumber File number of the flash file containing the set values for the
two-point correction.
(N=<value> command)
TPC_SetValue_LowRef Define the set value for the low reference image of the two-point
correction.
(J=<value> command)
TPC_SetValue_HighRef Define the set value for the high reference image of the two-
point correction.
(K=<value> command)
TPC_FirstImage_LowRef File number of the first low reference image of the two-point
correction. (A=<value> command).
TPC_FirstImage_HighRef File number of the first high reference image of the two-point
correction. (B=<value> command).
Table 42: Camera special feature: TwoPointCorrection
Feature Description
BGC_OperationMode Operation mode of the background correction.
(U=<value> command)
While reading this feature the MSB shows the state of the
integration process.
(0=Idle, 1=Busy)
BGC_OffsetValue Offset value for the background correction.
(M=<value> command)
Table 43: Camera special feature: BackgroundCorrection
Feature Description
LUT_OperationMode Operation mode of the LUT.
(G=<value> command)
LUT_CorrectionData_FileNumber File number of the data for the LUT.
(D=<value> command)
Table 44: Camera special feature: LUT