Specifications

Introduction

Pearleye Technical Manual V2.3.0

•Chapter Camera interfaces on page 25 describes the control junction (I/O

pin assignment), inputs / outputs and trigger features.

•Chapter Image processing on page 34 describes the function of the

Pearleye P-007 LWIR / Pearleye P-030 LWIR firmware. It is related to the

individual modules of image processing and shows in what way the user

can control these modules via the serial interface.

•Chapter Basic parameters and commands on page 39 describes the basic

configuration options and general commands available for the user, being

important for the operation of an ex factory preconfigured camera. Most

probably this information will be sufficient for most users.

•Chapter Advanced parameters and commands on page 46 describes the

advanced configuration of the Pearleye P-007 LWIR / Pearleye P-030

LWIR models. For the control of an ex-factory set up camera the

intervention within the parameters stated here or rather the use of the

mentioned commands is only necessary in exceptional cases.

• The appendix: Chapter Command reference on page 65 describes the

general command reference of the Pearleye P-007 LWIR /

Pearleye P-030 LWIR firmware.

•Chapter Index on page 83 gives you quick access to all relevant data in

this manual.

Conventions used in this manual

To give this manual an easily understood layout and to emphasize important

information, the following typographical styles and symbols are used:

Styles

Style Function Example

Bold Programs, inputs or highlighting

important things

bold

Courier Code listings, camera output etc. Output

Courier bold Commands sent to the camera Command

Upper case Register REGISTER

Italics Modes, fields Mode

Table 2: Styles