Manualshelf

Technical information

ManualsBrandsAllied Vision Technologies ManualsDigital CameraAVT GigEGoldeye
11121314151617181920
General tips for setting IP addresses
How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.0.0
16
General tips for setting IP addresses
1. While changing Windows IP address settings make sure that no camera
application is running.
2. To set the IP address of a PC NIC, open the network connections (Start ->
Settings -> Network connections). Then open the properties window of
the desired connection.
3. It is also possible to add a second (or even more) IP address(es) to the
NIC. In this case the Pleora IP engine always uses the last entry of the IP
list:
Example: This NIC works with two IP ranges:
• Static IP address for LAN traffic
•LLA for a camera
Figure 5: Set IP address