Specifications

Camera interfaces
Bigeye Technical Manual V2.0.0
35
At the end of the exposure this output stays active approx. 232 μs (1 line) lon-
ger than the real exposure. The active exposure is indicated in the image-on-
demand operation also by the LED L4 on the backside of the camera. For using
the exposure output an external resistor R
v
according to the drawing has to be
applied.
After the end of image exposure the 2680 active lines of the image are transmit-
ted. This image output is displayed by LED L5 at the backside of the camera.
Line-sync output (Pin 14)
The line-sync output (active low) supplies approx. 1200 mV at a termination
with 75 .
The line-sync output (active low) supplies approx. 900 mV at a termination with
75 .
The line-sync output (active low) supplies approx. 1200 mV at a termination
with 75 .
Figure 16: Line-sync output (Bigeye P-132)
Figure 17: Line-sync output (Bigeye P-629)
Figure 18: Line-sync output (Bigeye P-1100)
Bigeye P-132
Bigeye P-629
Bigeye P-1100