Instruction manual

Configuration of the camera

STINGRAY Technical Manual V2.2.0

282

Quick parameter change timing modes

You can choose between the following update timing modes:

• Standard Parameter Update Timing (slightly modified from previous

Stingray cameras)

• Quick Format Change Mode

Standard Parameter Update Timing

The camera behaves like older firmware versions without this feature. The

UpdActive flag has no meaning.

Quick Format Change Mode

This mode behaves like Standard Parameter Update Timing mode with the

following exception:

An already started image transport to the host will not be interrupted, but

an already started integration will be interrupted.

Note

For a detailed description see Chapter Quick parameter

change timing modes on page 133.

0xF1000570 PARAMUPD_TIMING Presence_Inq [0] Indicates presence of this feature

(read only)

--- [1..5] Reserved

UpdActive [6] Update active

see Chapter Encapsulated Update

(begin/end) on page 135

0: (default); reset to 0 means

Encapsulated Update end

1: set to 1 means

Encapsulated Update begin

--- [7..23] Reserved

UpdTiming [24..31] Update timing mode

If set to O:

Standard Parameter Update Timing

is active

If set to 2:

Quick Format Change Mode is active

Table 140: Advanced register: Update timing modes