Instruction manual

Camera interfaces

STINGRAY Technical Manual V2.2.0

Camera interfaces

This chapter gives you detailed information on status LEDs, inputs and out-

puts, trigger features and transmission of data packets.

IEEE 1394b port pin assignment

The IEEE 1394b connector is designed for industrial use and has the following

pin assignment as per specification:

Note

For a detailed description of the camera interfaces

(FireWire, I/O connector), ordering numbers and operat-

ing instructions see the Hardware Installation Guide,

Chapter Camera interfaces.

Read all Notes and Cautions in the Hardware Installation

Guide, before using any interfaces.

Figure 39: IEEE 1394b connector

Note

• Both IEEE 1394b connectors with screw lock mecha-

nism provide access to the IEEE 1394 bus and thus

makes it possible to control the camera and output

frames. Connect the camera by using either of the con-

nectors. The other connector can be used to daisy chain

a second camera.

• Cables with latching connectors on one or both sides

can be used and are available with lengths of 5 m or

7.5 m. Ask your local dealer for more details.

56789

Pin Signal

1TPB-

2TPB+

3TPA-

4TPA+

5 TPA (Reference ground)

6VG (GND)

7N.C.

8 VP (Power, VCC)

9 TPB (Reference ground)