Owner's manual

Camera interfaces

Bonito Technical Manual V2.3.0

Camera I/O connector pin assignment

(15-pin D-sub connector)

This connector is intended for supplying power as well as external input/output

signals.

Power supply (pin 1-4)

The camera requires 12 V DC (+5%, -10%) at a continuous maximum of 0.4 A.

We recommend to use all pins for power supply, 1 and 2 as well as 3 and 4).

Figure 9: Camera I/O connector pin assignment

Pin Signal Direction Level Description RS232

9-pin

D-sub

1 External Power +12 V DC

(+5%, to 10%),

0.35 A (4.2 W),

max. 0.36 A

Power supply

3 External GND 5 (GND)

5 Reserve

6 Sync Out RS232 Synchronization

signal

7 RXD In RS232 3 (TXD)

8 TXD Out RS232 Serial control 2 (RXD)

9 Reserve

10 Trigger input - Optocoupler

input, 5 V to 12 V,

max. 15 mA

External trigger

signal

11 +

12 Exposure output - Optocoupler

output,

open collector,

30 V, max. 150 mW

Active exposure

signal

13 +

14 Reserve

15 Reserve