Owner's manual

Introduction
Bonito Technical Manual V2.3.0
6
Introduction
This Bonito Technical Manual describes in depth the technical specifications,
dimensions, all pixel formats, bandwidth and frame rate related subjects.
Document history
Note

Please read through this manual carefully.
Version Date Remarks
V2.0.0 03.11.11 New Bonito Technical Manual
V2.1.0 23.01.12 • Corrected power supply values and mass values in chapter
Bonito CL-400B/C, Bonito CL-400B/C 200fps on page 13
• Added F-Mount in legend of Figure 5: Bonito CL-400B/C C-/
EF-/F-Mount (back) on page 18
• Corrected power supply values in:
–chapter Accessories on page 22
–chapter Camera I/O connector pin assignment (15-pin D-
sub connector) on page 25
–chapter Power supply (pin 1-4) on page 25
• Marked pin 5,6 and 14,15 as reserve in chapter Camera I/O
connector pin assignment (15-pin D-sub connector) on
page 25 and changed description in chapter Reserve I/O
(pin 5, 9 and 14-15) on page 28
Some minor corrections in
•chapter Fixed pattern noise (FPN) correction (C) on page 39
•chapter Number of lines (N) on page 58
•chapter Camera Link output mode setting (S) on page 60
V2.2.0 03.05.12 Added description of new features in camera firmware V1.0.7
• Changed max. current from 0.36 A to 0.4 A:
– Description to power supply: see chapter Bonito CL-
400B/C, Bonito CL-400B/C 200fps on page 13
–chapter Accessories on page 22
to be continued on next page
Table 1: Document history