Owner's manual

Parameters and commands

Bonito Technical Manual V2.3.0

Serial control interface configuration (s)

Use parameter s to set up the serial control interface of the camera, such as

baud rate, enable state, or echo mode.

Range From 0 to FFFF.

Since the parameter s is divided into three different sub-fields (see further

below), the following ranges cover all possible uses of this parameter. It is rec-

ommended not to use parameters that are outside the defined ranges.

0 to A, 20 to 2A, 40 to 4A, 60 to 6A, 80 to 8A, A0 to AA, C0 to CA, E0 to EA.

Default 2A (115,200 Baud, additionally activates second channel via Camera Link con-

nector O2, each character received from the host is echoed back to it.)

Related Three sub-fields are available to control the serial control interface, of the

Bonito CL-400B/C:

• Baud rate of the serial ports

• Echo mode

• Enable state of the serial ports

All of these sub-fields are controlled by the parameter s, however, each of them

works independently from the other sub-fields. The sub-fields are represented

by bit groups of different size within the parameter s.

4022 4064022 Bonito CL-400B EF-Mount 200fps

4030 4064030 Bonito CL-400C 200fps

4031 4064031 Bonito CL-400C F-Mount 200fps

4032 4064032 Bonito CL-400C EF-Mount 200fps

4100 4064100 Bonito CL-400BS

FFFF - Unknown / test / prototype

Bit group Sub-field description

x Controls the baud rate of the serial ports.

a Controls the enable state of the serial ports.

e Controls the echo mode.

Table 26: Attribution of bit groups and sub-fields

b Article number Camera variant

Table 25: Product variant code (b)