Owner's manual

Introduction
Bonito Technical Manual V2.3.0
8
Manual overview
This manual overview outlines the contents of each chapter of this manual.
•chapter Contacting Allied Vision Technologies on page 5 lists AVT contact
data (phone number and URL) for both:
– Technical information / ordering
– Commercial information
•chapter Introduction on page 6 (this chapter) gives you the document his-
tory, a manual overview (short description of each chapter) and conven-
tions used in this manual (styles and symbols).
continued from previous page
V2.2.1
(continued)
11 May 2012
(continued)
• Added example drawing: see Figure 10: Example conversion
circuit from +/- 6 V RS232 output to 5 V TTL input on page 26
• Added information to use exact multiples oft the current line
duration: see chapter Timer prescaler value (K) on page 45
• Changed +/-2 t
L
to t
L
in Table 13: Exposure control modes:
Exposure timing mode (bit group: e) on page 42
•Added rising edge description (bit group e, value=2): see
Image on demand mode (IOD) with exposure timer on page
43
• Added more precise description of PIV mode: see PIV mode =
On on page 45
• Added new chapter Product variant code (b) on page 65
• Added new chapter Command reference on page 70
V2.3.0 2013-Sep-30 • Updated RoHS (2002/95/EC) to RoHS (2011/65/EU)
• Added „Surge“ warning as requested for the EMC lab test
• Corrections derived from terminology alignment
• Change of font, necessary due to changes in typeface
• Redesigned the complete PIV mode description, added flow
diagram and table
• Redesigned the biggest part of the Exposure Mode Control
description, incl. new tables and flow diagrams
• Redesigned the Baud Rate description
• Introduced overview of value ranges, default values and
examples for each parameter described in the chapter Cam-
era interfaces on page 21
• Replaced the drawings with new drawings that show all four
sides of the camera in chapter Camera dimensions on page
16
Version Date Remarks
Table 1: Document history