Instruction manual

Prosilica GC Technical Manual V2.1.0

Camera interfaces

Gigabit Ethernet port

The Gigabit Ethernet port conforms to the IEEE 802.3 1000BASE-T standard for

Gigabit Ethernet over copper. We recommend using Category 6 or higher com-

patible cabling and connectors for best performance.

www



GigE Installation Manual offers detailed instructions for using

Prosilica GC cameras.

http://www.alliedvision.com/fileadmin/content/documents/

products/cameras/various/installation-manual/

GigE_Installation_Manual.pdf

Note



See Hardware Selection for Allied Vision GigE Cameras appli-

cation note for a list of recommended Ethernet adapters:

http://www.alliedvision.com/fileadmin/content/documents/

products/cameras/various/appnote/

Hardware_Selection_for_Allied_Vision_GigE_Cameras.pdf

A standard Ethernet adapter is available for purchase from

Allied Vision:

P/N: 02-3002A

Model: Intel Pro 1000/PT

Note



Cable lengths up to 100 m are supported.

The 8-pin RJ-45 jack has the pin assignment according to the

Ethernet standard (IEEE 802.3 1000BASE-T).

Allied Vision recommends using locking-screw cables from

Components Express, Inc. for a perfect fit. Visit the CEI product

configurator to customize the cable according to your needs.